Electrolysis: An Innovative Technique to Desaturate Tailings- Juniper Publishers

 Civil Engineering Research Journal- Juniper Publishers

 

Abstract

Within the entire range of failure modes that have occurred at tailings impoundments, static and dynamic liquefaction are likely the most common. Static liquefaction can be a result of slope instability issues alone or can be triggered as a result of other mechanisms, dynamic liquefaction may be triggered by rapid forms of cyclic loadings, such as earthquakes. Several techniques, that have the aim to prevent this kind of failure, have been developed during the last centuries. In this paper, the attention will be focused on desaturation and on electrolysis as an innovative technique to desaturate the soils.

p align="justify">Keywords: Tailings; Liquefaction; Desaturation; Electrolysis

Introduction

Tailings dams are some of the largest earth structures geotechnical engineers construct. After separating the ore from the gangue, the byproduct of mining may be stored to build tailings dams (earth-fill embankment). Generally, tailings can be liquid, solid, or a slurry of fine particles, usually characterized by high toxicity and polluting substances. Owing to that, it is important to treat this kind of materials for a possible reuse or before dumping. The tailings deposits are usually soft, loose and permanently saturated. As a consequence, they may be subjected to liquefaction phenomena. Liquefaction phenomena can be due to monotonic or cyclic loading in undrained conditions. The former is called static liquefaction, while the latter cyclic liquefaction. In both cases, a sudden increase of pore pressure may lead to a loss of shear strength and stiffness with catastrophic consequences.

Several cases of such dam incidents (static and dynamics liquefaction) have been reported recently. Failures of the Barahona dam (Chile) in 1928; El Coble dam (Chile) in 1965; Mochikoshi dam (Japan) in 1978; Merriespruit (South Africa) in 1994; Omai (Guyana) in 1994; Los Frailes (Spain) in 1998; Baia Mare (Romania) in 2000 and Aitik (Sweden) in 2000 are typical examples of failures of the tailings dams. It is worth noting that these critical phenomena involve all parts of the world.

An acute societal concern over such events has resulted in enforcing stringent safety criteria at mining operations in some parts of the globe. However, the standard of public reporting varies considerably from country to country and from region to region. Many tailings dam failure incidents remain unreported or lack basic information when reported. This has seriously hindered the development of safety regulations in such areas. It is extremely important to increase the safety coefficient in these areas. Owing to that, researchers in the world are studying this kind of phenomena to develop new technologies to mitigate their effects as much as possible.

Desaturation as Mitigation Technique Against Liquefaction

It is important to consider liquefaction potential of dams or embankments to prevent this kind of phenomena. Various techniques have been developed during the last centuries, such as: densification; draining; soil reinforcement and desaturation. One of the most promising techniques against liquefaction is desaturation. As well-known when the degree of saturation (Sr) increases, the resistance to liquefaction increases. Desaturation seems to be a useful remediation against liquefaction, especially in cyclic liquefaction as shown by several research works [1-4]. In fact, a small decrease in the degree of saturation of a fully saturated sand can result in a significant increase in shear strength against liquefaction. Recently, new interpretations of liquefaction phenomena in unsaturated conditions have been provided by [5] using an energetic approach, which is able to simulate the resistance to liquefaction of unsaturated sandy soils as reported by [6]. Nevertheless, few researches have been performed to study how desaturate the soils and to apply in situ this effective mitigation technique. One of the most interesting techniques could be an induced desaturation by means of electrokinetic phenomena. Desaturation can be reached by introducing small amounts of gas through electrolysis. By lowering the degree of saturation from full saturation to about 90%, for example, volumetric strain and pore pressure generation can be reduced by several times.

Desaturation of Soil Deposits Through Electrolysis

When an electric field is applied to the soil for some time through electrodes, electrokinetic phenomena are generated (electroosmosis, electromigration and electrophoresis). In particular, pore water is transported by electroosmosis through the porous medium and, at the same time, electrolysis of pore water occurs near the electrodes. This leads to the formation of ions at the cathode and ions at the anode, which are transported by the flow and by the electric field, and there is therefore a change of , that is not homogeneous in the porous medium. It means that electrolysis may be used to entrap gas molecules in saturated specimen. Electrokinetic treatments are increasingly being used in geotechnical and geoenvironmental engineering for site remediation and dewatering of clays [6-12]. Recently, [13] have explored the use of electrokinetics to grout soils for liquefaction mitigation applications. While the gas quantities produced by electrolysis are not high enough to produce any safety hazard (especially gas), they are significant enough to change the degree of saturation. Furthermore, the electrolysis process can generate, at least under laboratory conditions, a controlled amount of gases without disturbing the specimen [14].

Although the effectiveness of electrolysis to desaturate sandy soils has been investigated in laboratory [15], new tests can be useful to verify the effectiveness and the applicability in a bigger scale, realizing, for example, field trials in liquefiable areas. There have been limited studies investigating the practical considerations for field implementations and the factors affecting the process. In particular, some technical problems could hamper its application at the industrial scale. These problems include the electrode corrosion and high-power consumption [16]. Process parameters such as the timing of the electric field application, total energy input and energy input distribution in time will affect the desaturation results and overall the energy efficiency. Different operating conditions are possible, such as the use of inert electrodes like graphite and “pressed carboncoated” electrodes, in order to reduce the corrosion; or the use of intermittent current for the reduction of power consumption and electrode corrosion. This technique has several advantages, such as being less expensive (cost-effective), being applicable both in-situ and ex-situ, rapid installation and easy to operate (simplicity), having silent operation, having the advantage of not disturbing the site activities, and relatively short treatment duration [17-22]. It is also worth noting that electrolysis, apart from desaturation, could be extremely important also to remove polluting substances.

Conclusion

Liquefaction is one of the most critical issues for tailing dams in all parts of the world as demonstrated by several case histories. Sometimes, traditional mitigation techniques (such as densification or soil reinforcement) seem not to be easy to apply. Owing to that, new technologies have been investigated. In particular, desaturation is considered one of the most promising techniques. To desaturate soil deposits electrolysis may be used. Even though it is studied in small scale, demonstrating its effectiveness, new studies have to be performed to investigate its application in field.

For more open access journals, please click on: Juniper Publishers

For more civil Engineering articles, please click on Civil Engineering Research Journal

https://juniperpublishers.com/cerj/CERJ.MS.ID.555752.php