Juniper Publishers: Estimation of Evaporation at Tharandt, using Daily...

Juniper Publishers: Estimation of Evaporation at Tharandt, using Daily...: International Journal of Environmental Sciences & Natural Resources Juniper Publishers Authored by Antensay Mekoya* Abstra...

Comments

Post a Comment

Popular posts from this blog

Further Thoughts on the Structural Efficiency of Suspension Bridges- Juniper Publishers

Image
Juniper Publishers- Journal of Civil Engineering Abstract Recent proposals for very long span bridges, such as those proposed for the Straights of Messina and Gibraltar, have reopened the questions as to which forms provide feasible solutions and within those forms what particular geometries will result in the most efficient solution - in terms of both material volume and cost? While these questions can now be approached using sophisticated optimization software it would seem that simple engineering reasoning still has much to offer. The following rehearses some simple analytical approaches to the question of assessing the relative efficiencies of different bridge geometries considered in an earlier paper and uses this approach to widen the discussion and address the issues of what parametric choices within each of these different geometric classes of bridge would provide the most materially efficient solution.It compares the material efficiency of the common...
Read more

Geoid Modelling for Surveying Works Using Satellite Geo-Spatial Data- Juniper Publishers

Image
 Civil Engineering Research Journal- Juniper Publishers   Introduction Nowadays fully three-dimensional positions - latitude, longitude and height are commonly provided by Global Positioning Systems (GPS) with WGS84 ellipsoid as a reference surface. The knowledge of terrain heights is very essential for several surveying and civil engineering works. The type of heights needed for such applications is a height above mean sea level (MSL), usually called orthometric height. A precise geoid model is required to transform GPS-based geodetic heights to orthometric height to allow such data to be directly used in surveying and civil engineering applications [1]. The process of geoid modelling can only be performed if dense networks of precise levelling or gravity and astronomical deflections of vertical are made available. Go to Objective The objective of this article is to formulate a local geoid model that would allow utilization of GNSS data in the fields of surveying and civil en...
Read more

Self-Sensing Concrete for Smart Infrastructure- Juniper Publishers

Image
  Civil Engineering Research Journal- Juniper Publishers   Opinion Along with the research advancement in the field of nanotechnology, the sensor used in construction industry has also become smart which are designated as self-sensing materials. For the smart cities to be smarter, these self-sensing materials are proving more helpful, as they monitor structural health of the civil engineering infrastructures. These smart materials include smart concrete, which imparts any concrete structure the abilities of self-sensing. This self-sensing concrete establishes the relationship between changes in internal strain and changes in corresponding material properties like electrical resistance or temperature. These sensors are having more advantages of cost and sensing size, over the conventional structural health monitoring sensors available in the market as it provides more durability combined with uniformly distributed measurements. This article takes a review of the recent advancem...
Read more